JMICRON JMB36X SATA PATA CONTROLLER DRIVER DOWNLOAD

I can't find which driver is related to the jmicron. Could you pass on a link please of your setup? Hot-plugging the PCIe card never worked for me. Sanvean Windows 7 Professional 64 posts Northwestern Pennsylvania. Here is the link: I made changes at three locations: It is not a data table containing some form of initial register values.

Uploader:	Felar
Date Added:	8 May 2005
File Size:	44.75 Mb
Operating Systems:	Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads:	52400
Price:	Free* [*Free Regsitration Required]

I have two HDD conect. The computer is a Dell with the Intel x chipset.

Many thanks for the modded ROM. Please work with the latest bios and share it. Johng1 Win7 home premium 64bit 6 posts. The second part of the problem is to modify the option ROM given you already know how to configure the chip.

I can't find which driver is related to the jmicron. Hard drive is SATA. Welcome to Windows 7 Forums. I speculate its purpose is to disable the option ROM, allowing the main BIOS to set up the rest of the device configuration without interference.

It would be great if you can test it. Or is there any trick?

JMicron JMB36X SATA Controller Driver Driver - TechSpot

Skiprom works best for me in hackintosh. They seem important, causing PCI config register bits 0xed[5: Trying to do that in the option ROM causes a several-minute hang during boot when loading the option ROM again, seemingly waiting for a disk and giving upeven when a PATA disk is present.

Why can it be?. Only modifying register df[1: The last byte of the file is used as a checksum. Linux sets register 0x41 to 0xa1, while cotroller option ROM will set it to 0xf1 or 0x Windows 7 Professional I even tried running under admin dirrectly but no difference. You can use these HTML tags.

To continue using , please upgrade your browser.

I am having a hard time installing the drivers. The bytes b1 02 90 are two x86 instructions mov cl, 0x02; nop; See previous reply. Could you pass on a link please of your setup? Do i need to fix a checksum value as well? Sanvean Windows 7 Professional 64 posts Northwestern Pennsylvania. A JMicron-specific driver is available only for Windows. Given my limited abilities to understand hex, I cannot locate where to apply the changes to.

Therefore, I chose to set register df[6] to cause the option ROM to quit without detecting drives.

The bytes that were changed here are x86 code that reads psta PCI configuration register and does something with the value. You might try looking through the Linux kernel sources to see if the driver for the 88SE gives any clues as to how the chip works….

JMicron JMB363 Add-on Card AHCI mode

This is done the same way as with any other disk. I want to boot an ide hd from a jmb card.

The original bytes were e8 xx xxwhere e8 is the opcode for the CALL instruction, and the bit immediate operand is the relative branch target. From the CD it installed the driver but does not recognize any drives attached to the controller card.